Iron Neck
Fitting Guide

1. Get The Right Size

Both Small and Large sizes adjust to fit a range of head sizes by inflating an air bladder behind the rear pad. This pushes your head forward into the soft front pad. To get the best Iron Neck size for yourself, hat size (measured from front to back) and circumference (measured just above the ears) are both great indicators. The cutoff between Small and Large is around 7 1/8" hat size or 22.5" circumference.

2. Adjust Head Strap

The Iron Neck should rest just above your eye brows and top of your ears. This is an easy adjustment that once you've made once you will always know which marking is right for you.

3. Press Forehead Into Front Pad And Pull Over Head

First, tilt the Iron Neck forward 45 degrees. Position your forehead so the bottom of the front pad sits just above the eyebrows, then pull over the back of your head. If it's your first time, you may need to adjust the head strap slightly to make sure it's in the proper position.

Tip: Do not pull Iron Neck straight down on head

4. Inflate With

AirFit Technology

Pump the AirFit Bulb so that the rear pad has firmly grabbed ahold of your head. Once you're going through the movements, you can inflate more air or use the air release button to deflate, as necessary.

Tip: If you find yourself inflating the pump more than 15 times, the Small size may be a better fit.

5. Clip In Chin Strap

The chin strap does not need to be tight on the chin, but rather hanging loosely underneath. It is not meant to be an anchor point, but simply a safety precaution.

Iron Neck Fitting Guide

1. Get The Right Size

Both Small / Medium and Large / Extra Large sizes adjust to fit a range of head sizes by inflating an air bladder behind the rear pad. This pushes your head forward into the soft front pad. To get the best Iron Neck size for yourself, hat size (measured from front to back) and circumference (measured just above the ears) are both great indicators. The cutoff between Small m Medium and Large / Extra Large is around 7 1/8" hat size or 22.5" circumference.

2. Adjust Head Strap

The Iron Neck should rest just above your eye brows and top of your ears. This is an easy adjustment that once you've made once you will always know which marking is right for you.

3. Press Forehead Into Front Pad And Pull Over Head

First, tilt the Iron Neck forward 45 degrees. Position your forehead so the bottom of the front pad sits just above the eyebrows, then pull over the back of your head. If it's your first time, you may need to adjust the head strap slightly to make sure it's in the proper position.

Tip: Do not pull Iron Neck straight down on head

4. Inflate With 

AirFit Technology

Pump the AirFit Bulb so that the rear pad has firmly grabbed ahold of your head. Once you're going through the movements, you can inflate more air or use the air release button to deflate, as necessary.

Tip: If you find yourself inflating the pump more than 15 times, the Small size may be a better fit.

5. Clip In Chin Strap

The chin strap does not need to be tight on the chin, but rather hanging loosely underneath. It is not meant to be an anchor point, but simply a safety precaution.

Sale

Unavailable

Sold Out